AKIRA schematic diagram service manual circuit diagram wiring schema repair instruction guide user manual free pdf download

 

       
       
       
       

 

 

                                                          Search service manual

   
   
   

TV Akira CT14DX9R LC863320A-5R19 24C04

TV AKIRA CT14FES1 8803

TV AKIRA CT14NK9R 3S10

TV AKIRA CT14NX9R 3S10

TV AKIRA CT14PF9

TV AKIRA CT2197MT PRO21M

TV AKIRA CT21AZ9MK2

TV AKIRA CT21DS9A 3Y01

TV AKIRA CT21DS9CP 3Y01

TV AKIRA CT21DS9CP(IKD) 3Y01

TV AKIRA CT21DS9N 3Y01

TV AKIRA CT21DS9R 3Y01

TV AKIRA CT21FCS1

TV AKIRA CT21FD15B HD2

TV AKIRA CT21FGP1

TV AKIRA CT21LAS1

TV AKIRA CT21NI9R 3S10

TV AKIRA CT21PAS1

TV AKIRA CT21SKS3V

TV AKIRA CT21TN9A 3S10

TV AKIRA CT25NX9AN

TV AKIRA CT29F9MK1

TV AKIRA CT29FD9 H707V

TV AKIRA CT29HCS3

TV AKIRA CT29NI9 5N11

TV AKIRA CT29NI9AN

TV AKIRA GR29D41 H707V (5CB1170

TV AKIRA SS1

 

     
   AKIRA schematic diagram service manual circuit diagram wiring schema repair instruction guide user manual free pdf download. AKIRA Service Handbuch Schaltungen Reparaturanleitung Bedienungsanleitungen kostenlos pdf download. AKIRA Schéma service manual schéma zapojení schémat oprava návod k obsluze návod k použití free pdf ke stažení. AKIRA Schéma de principe de service manuel Schéma câblage schéma réparation instruction notice manuel téléchargement gratuit pdf. AKIRA Diagrama esquemático serviço manual do circuito diagrama de fiação esquema reparação instrução guia manual do usuário livre PDF Download. AKIRA Schema di servizio manuale circuito schema elettrico schema di riparazione di istruzioni guida manuale pdf gratuito scaricare.AKIRA  schemat instrukcja obsługi Schemat okablowania Schemat naprawa instrukcja instrukcja obsługi free pdf pobierz. AKIRA şeması servis manuel devre şeması kablolama şeması onarım talimat kılavuzu kullanım kılavuzu ücretsiz pdf indir. AKIRA Schema service manual schema bedrading schema reparatie gebruiksaanwijzing handleiding gratis pdf te downloaden. AKIRA schematică diagrame de service manualul de circuit diagrama de conexiuni Schema de reparatii de instructiuni Manual de utilizare pe gratis download pdf.  
     
  CAUTION: Before servicing receivers covered by this service manual and its supplements and addenda, read and follow the SAFETY PRECAUTIONS of this publication. Remember: Safety First.

General Guidance An isolation Transformer should always be used during the servicing of a receiver whose chassis is not isolated from the AC power line.

Use a transformer of adequate power rating as this protects the technician from accidents resulting in personal injury from electrical shocks. It will also protect the receiver and it's components from being damaged by accidental shorts of the circuitry that may be inadvertently introduced during the service operation.

If any fuse (or Fusible Resistor) in this TV receiver is blown, replace it with the specified.

When replacing a high wattage resistor (Oxide Metal Film Resistor, over 1W), keep the resistor 10mm away from PCB.

Keep wires away from high voltage or high temperature parts.

General Servicing Precautions


1. Always unplug the receiver AC power cord from the AC power
source before;


a. Removing or reinstalling any component, circuit board
module or any other receiver assembly.
b. Disconnecting or reconnecting any receiver electrical plug or
other electrical connection.
c. Connecting a test substitute in parallel with an electrolytic
capacitor in the receiver.
CAUTION: A wrong part substitution or incorrect polarity
installation of electrolytic capacitors may result in an
explosion hazard.
 

2. Test high voltage only by measuring it with an appropriate high
voltage meter or other voltage measuring device (DVM,
FETVOM, etc) equipped with a suitable high voltage probe.
Do not test high voltage by "drawing an arc".
 

3. Do not spray chemicals on or near this receiver or any of its
assemblies.
 

4. Unless specified otherwise in this service manual, clean
electrical contacts only by applying the following mixture to the
contacts with a pipe cleaner, cotton-tipped stick or comparable
non-abrasive applicator; 10% (by volume) Acetone and 90% (by
volume) isopropyl alcohol (90%-99% strength)
CAUTION: This is a flammable mixture.
Unless specified otherwise in this service manual, lubrication of
contacts in not required.
 

5. Do not defeat any plug/socket B+ voltage interlocks with which
receivers covered by this service manual might be equipped.
 

6. Do not apply AC power to this instrument and/or any of its
electrical assemblies unless all solid-state device heat sinks are
correctly installed.
 

7. Always connect the test receiver ground lead to the receiver
chassis ground before connecting the test receiver positive
lead.
Always remove the test receiver ground lead last.
 

8. Use with this receiver only the test fixtures specified in this
service manual.
CAUTION: Do not connect the test fixture ground strap to any
heat sink in this receiver.

 

 

 
Copyright © 2007 Tehnomagazin.com
Terms & Conditions                                        Privacy Policy                                                Impressum