|
TV BEKO PROBLEM - REPAIR
|
Chassis |
Problem |
Repair Tip |
|
12.1 |
Channels are shifting |
Check and replace C961-C403-C460-C461-R453-R454-R455 |
|
12.1 |
In some scenes, the CPT seems to have low emission |
Check 2nF on C806 pos. |
|
12.1 |
Sound is distorted |
Check 10nF on C107 pos. |
|
Chassis |
Problem |
Repair Tip |
|
12.3 |
Defected horizontal transistor BU808DFI (T552). |
Add another 82R 3W resistor in parallel to the 82R 3W (110823) on
position R554. |
|
12.3 |
Whistling sound |
Check and replace Linearity coil L551 |
|
12.3 |
In some scenes, the CPT seems to have low emission |
Check 2nF on C705 pos. |
|
12.3 |
A low amplitude whistle sound (typically 2-3 kHz) can be heard from
speakers at near distance. |
1) Replace 12K resistor on position R329 (connected to pin 9 of
IC317) with 10K resistor 2) Replace 12K resistor on position R330
(connected to pin 9 of IC318) with 15K resistor. |
|
12.3 |
Defected TDA6107 on CRT module |
Please apply TCN 2002/10 |
|
12.3 |
Brightness of the picture changes constantly like flashing |
Separate the 4 pin cable (which goes from Stereo module to main
chassis) from Video IC and RGB cable (which goes to CRT module). In
this way, the interference is minimized. |
|
Chassis |
Problem |
Repair Tip |
|
12.4 |
OSD is defected or colours are not good |
Check and replace IC953 |
|
12.4 |
Defected TDA6107 on CRT module |
Please apply TCN 2002/08 |
|
Chassis |
Problem |
Repair Tip |
|
12.5 |
OSD is defected or colours are not good |
Check and replace IC953 |
|
12.5 |
Picture is snowy |
Resolder 150R on position R116 |
|
12.5 |
Horizontal screen is shifting |
Check and replace 27R on R529 pos. |
|
12.5 |
No picture |
Check 120pF on pos. C150 |
|
12.5 |
Sometimes no colour |
Check 8.2pF on pos. C130 |
|
12.5 |
Microprocessor spare parts codes in the service manual are not
correct |
Please see TCN 2003/04 |
|
12.5 |
Position of teletext / OSD is not correct after replacing IC401
(from MB7120-03 to MB7120-04 or 06) |
Enter service menu - Press green button to enter Geometry Menu -
Adjust the window when OSDH and OSDV items selected (change value of
these items). |
|
12.5 |
Defected TDA6107 on CRT module |
Please apply TCN 2002/08 |
|
12.5 |
When TV is adjusted 16:9 mode, shading can be seen on top of the
screen. |
Replace R504 (470 R 1/2W) resistor with 220R 1/2W resistor. (This
modification will be done TV sets for 20” SAMSUNG CPT’s .) - Replace
R504 with 270R 1/2W resistor for other CPT’s. |
|
Chassis |
Problem |
Repair Tip |
|
12.6 |
D607 and D608 type change |
New ones are: D607 DIODE RGP15K 303400 D608 DIODE RGP30D 303228 |
|
12.6 |
Jitter during max volume |
The value of R624 was changed from 0Ω to 820Ω (parts code 171824). |
|
Chassis |
Problem |
Repair Tip |
|
12.7 |
D607 and D608 type change |
New ones are: D607 DIODE RGP15K 303400 D608 DIODE RGP30D 303228 |
|
12.7 |
How smart loader (G70520) works for Hotel mode |
Please read 12.7 Hotel Mode + Smart Loader.doc*** Requirement: It
should be produced as Hotel TV 1) Is Eeprom 24C16? 2) Is I2C
connection to the Scart port available? Otherwise apply:- Connect a
cable between Pin 10 of SCART and connection point of R470 and D407
(SDA) - Connect a cable between the pin 12 of SCART and connection
point of R469 and D406 (SCL) |
|
12.7 |
“9301” code does not work for entering service mode |
Try “8500” code (SW can be 12.8). |
|
12.7 |
Some malfunctioning will be encountered in channel frequency setup,
when Hotel option is changed to “Hotel TV” in Service Mode. |
This is due to Eeprom capacity. For Hotel mode usage, the eeprom in
IC402 must be changed to AT24C16N SC2.7 (452662) from
AT24C08N-10SI-2.7 (453031-01) |
|
Chassis |
Problem |
Repair Tip |
|
12.8 |
Horizontal syncronization is not good and no OSD |
Check 1nF C410 |
|
12.8 |
Microprocessor spare parts codes in the service manual are not
correct |
Please see TCN 2003/04 |
|
12.8 |
The picture is shifted towards the right of the screen when TV is
turned on (There is black band on the screen). The defect disappears
after a few minutes. |
Replace BU808DFI on position T552. The problem is due to a quality
problem of BU808DFI for a small period. |
|
12.8 |
Some malfunctioning will be encountered in channel frequency setup,
when Hotel option is changed to “Hotel TV” in Service Mode. |
This is due to Eeprom capacity. For Hotel mode usage, the eeprom in
IC402 must be changed to BR24C16F (452637) from AT24C04N (453002). |
|
12.8 |
For Secam DK versions: STV2249C defected (No sound) |
1. Replace STV2249C (452990) 2. Remove J143 (jumper) and insert 1K
1/4W resistor in that position |
|
12.8 |
Defected TDA6107 on CRT module |
Please apply TCN 2002/ |
|
Chassis |
Problem |
Repair Tip |
|
14.1 |
Entering service mode for Multimedia sets |
In main menu press "7592" buttons. |
|
14.1 |
Screen size is increasing and decreasing |
Check and replace R606 and 607 on power supply circuit |
|
14.1 |
Set starts up but RC and keyboard do not response. No picture. |
Check 330pF on C170 pos (on IC101 pin 18 line) |
|
14.1 |
Sometimes flyback lines |
Replace 220R 1/4W R709 with a stronger one (example 101223). |
|
14.1 |
No horizontal sync |
Check 1N4148 on pos. D503 |
|
14.1 |
No colour |
Check C113 capacitor |
|
14.1 |
Sound distortion from central speaker |
Check trystor TH601 |
|
14.1 |
Mono version microprocessor codes |
Please see TCN 2002/18 |
|
14.1 |
Replacing Termal Brand FBT with Eldor |
Please apply TCN13/2002 |
|
14.1 |
Defected horizontal transistor BU508DF (T504) |
Check and replace C129 - 2.2nF on pin 42 of IC101 |
|
14.1 |
Picture is indistinct |
Check and replace C705 |
|
14.1 |
TV does not work |
1) Check C555-T552 2) Check C905 150 mf 400 V 3) Check
PH601,PC123,IC601,TH601, T601 4) Check S901-F60 5) Check R121 CHİP
(If no OSD) 6) Check R639 DİRENÇ (If T601 is demaged) 7) Check C506
8) Check IC701, D511 9) Check TR502, T504 10) Check I601 |
|
14.1 |
No picture |
4) R615 01 OHM, D608 RGB |
|
14.1 |
Entering service mode for Multimedia sets |
In main menu press "7592" buttons. |
|
14.1 |
Some channels are absent |
Replace R129 with 2.5Kohm potentiometer |
|
14.1 |
After getting warm colors are going and returning frequently |
Check and replace R420/330K |
|
14.1 |
Sound exists but screen is dark |
Check and replace TU101 tuner |
|
14.1 |
TV stays at standby, can not be operated by remote control |
1) Check and replace D505 1N 4148 2) Check and replace R115 150 kohm |
|
14.1 |
TV is switching off at max volume |
Check abd replace R 607 0.33 Ohm |
|
14.1 |
Picture is getting dark and returning back to the normal level |
Check and replace C630 |
|
14.1 |
Vertical faullt on top of screen |
Check and replace R521 0.47R |
|
14.1 |
Linearity coil humming |
Insulate L502 |
|
14.1 |
No sound and picture |
Check S601 |
|
14.1 |
No broadcast, only snowy picture |
Check and replace C157 |
|
14.1 |
Picture is snowy |
Check and replace C143 |
|
14.1 |
No teletex |
Check and replace C143 |
|
14.1 |
No sound and TDA7263 is getting warm |
Check and replace C265, C364, C365, C332, C333, C348 |
|
14.1 |
Sound is bad at some channels |
Check and replace IC101 |
|
14.1 |
Comes a cracking sound inside from TV |
Check TR502 |
|
14.1 |
Screen size is increasing and decreasing |
Check and replace R606 and R607 on power supply circuit |
|
14.1 |
Sometimes flyback lines |
Replace 220R 1/4W R709 with a stronger one (example 101223). |
|
14.1 |
Set starts up but RC and keyboard do not response. No picture. |
Check 330pF on C170 pos (on IC101 pin 18 line) |
|
14.1 |
No horizontal sync |
Check 1N4148 on pos. D503 |
|
14.1 |
No colour |
Check C113 and C115 capacitor |
|
14.1 |
Sound distortion from central speaker |
Check trystor TH601 |
|
14.1 |
No sound |
Check and replace IC303-IC304 |
|
14.1 |
Colors are bad |
Check and replace Q101 |
|
14.1 |
No Standby |
Check T601 TRN 2SK2545,IC601 IC MC44608 ve ST601 2.5A |
|
14.1 |
Mono version microprocessor codes |
Please see TCN 2002/18 |
|
14.1 |
There is sometimes bad noice |
Put 1nF capacitor parallel to C363 1nF |
|
14.1 |
When TV is switched on from the switch comes a cracking sound 4-5
times inside from TV |
Replace C610 15mF with 47mF and put 10mF capasitor on poz C642
parallel to C610 |
|
14.1 |
when channels are changed by using remote control, OSD is shifting,
sometimes color is bad |
Check and replace C117 270 pF on the leg of Q102 |
|
Chassis |
Problem |
Repair Tip |
|
14.2 |
TV can not enter service mode by service remote control |
With the following software versions onwards, to enter service menu,
first activate the “Picture Menu” with the user remote control and
press “9301” (Press “0” button to exit the Service Mode). Stereo
versions : SB8973-A02, SB8975-A02 (For B,C and D versions will be
apllied in time). Mono versions : SC3325-A05, SC3325-B07,
SC3325-C06, SC3325-D05 |
|
14.2 |
Defected horizontal transistor BU508DF (T504). |
Check and replace C129 - 2.2nF on pin 11 of IC101 |
|
14.2 |
No sound |
Check and replace C178 - 4.7nF on pin 26 of IC101 |
|
14.2 |
No picture |
Check and replace R162 -47R connected to +8V |
|
14.2 |
Is Hotel Mode available |
Not available. Hotel mode in service mode is for application only. |
|
14.2 |
If the unit is in power off state long enough (for example over
night) then always when you switch it on, the complete upper part of
the picture is messed up and fuzzy. |
Please check and replace vertical IC, TDA8359J on position IC501. |
|
14.2 |
Coloured spots on the corners (Degaussing problem) |
Please replace 9R PTC on R602 with two 18R PTC’s (code 154222) in
parallel. |
|
14.2 |
Sometimes flyback lines |
Replace 220R 1/4W R709 with a stronger one (example 101223). |
|
14.2 |
Microprocessor spare parts codes in the service manual are not
correct |
Please see TCN's 2003/10, 2003/08 and 2002/17 |
|
14.2 |
Sound is distorted |
Check and replace C112 |
|
14.2 |
Subwoofer sound is not good, sometimes distorted |
Check 1nF on position C361 which is parallel to the speaker |
|
14.2 |
Sound is distorted during start up |
Check C350 capacitor |
|
14.2 |
Spot on the CPT during shut off |
Please check if C704 on CRT module is short circuited |
|
14.2 |
Vertical defects :IC501 (TDA8359J) and R522 (Fuse Resistor) |
Please apply TCN 2002/14 |
|
14.2 |
Replacing Termal Brand FBT with Eldor |
Please apply TCN 2002/13 |
|
14.2 |
Mono, PIP versions are not available in the manual |
Please see the soft copy on the web pag |
|
Chassis |
Problem |
Repair Tip |
|
16.1 |
Defected horizontal transistor BU808DFI (T552). |
Add another 82R 3W resistor in parallel to the 82R 3W (110823) on
position R554. |
|
Chassis |
Problem |
Repair Tip |
|
20.2 |
Coloured spots on the corners (Degaussing problem) |
Please replace 9R PTC on R108 with two 18R PTC’s (code 154222) in
parallel. |
|
20.2 |
Yellowish spots on Teletext (Local Dooming) |
In the service menu , options 2, there are NVM-edit address, NVM-edit
data. For the text contrast the address is "5F6" and value must be
"33". If it is not "33", please set this value. Even this value is
"33" but text contrast is high, you can decrease this value up to
"25". |
|
20.2 |
Q204 horizontal transistor, R210, R218, R206, R222 are damaged |
Replace R206 with RW 47R J 7W (120472) and R222 with RWF 1K J 1.5W
(122114) |
|
20.2 |
TV shuts off intermittently |
1. Fasten the connectors of Featurebox, uP/IF (CN501B, CN502B) and
I/O Scart modules 2. Resolder Vprot (Vertical protection) line from
IC201 (vertical IC on main chassis) to pin 11 of IC804 (DDP on
Featurebox) 3. Resolder pin 2 (+10v) and pin 4 (-10v) of IC201
(vertical IC) 4. Check H-driver circuit (C205, R205, TR201, Q203
etc.) 5. Check and replace R158 (0.1R) and R161 (0.1R) on SMPS
outputs. |
|
20.2 |
Options are not complete in the service manual (Tuner Type, etc.) |
Please see TCN 2002/09 |
|
20.2 |
Adjustments are not available in the service manual (supply voltage,
AGC, IF) |
Please see TCN 2002/09 |
|
20.2 |
Set can not be switched on from standby. Defect of fuse resistors
0.1R 0.4W of position R158 and R161 |
Replace 0.1R 1/4W (119109 ) resistors of positions R158 and R161 to
0.1R 0.25W (119113). |
|
20.2 |
TV enters Service Menu randomly |
Replace IC503 with SW version SBC256_05 (452286) |
|
20.2 |
During switch off, SPOTS can be seen in the middle of screen |
Replace C930 (2.2 uF/250V) capacitor on CRT board with 4.7 uF/250V
capacitor. |
|
20.2 |
Poor color and contrast |
1) Remove R922-R927-R933 (43K 1/2W) resistor and insert 47K 1W
resistor. 2) EnterVIDEO adjustments in service menu with service RC.
- Increase RED DRIVE-GREEN DRIVE-BLUE DRIVE values “+3 “ then the
factory presets. - Increase BCL THRESHOLD value “+1” then the
factory presets. |
TV BEKO ? (pł.gł
190-97) 20.2 (190-07) (1
TV BEKO 10.2
(50S.190D...
TV BEKO 10.3
(63Y.190...)
TV BEKO 10.4
(5FT00000--
TV BEKO 10.4 (5FT110)
TV BEKO 10.4
(67D.190...)
TV Beko 10214 10.2
(AT2)
TV BEKO 10214 AT2
(AT02)
TV BEKO 10502TCM 20.2
(100Hz)
TV BEKO 11.1
(5LZ.190...)
TV BEKO 11.2
(6SZ.190...)
TV Beko 11214T 10.2
(AT2)
TV Beko 11221T 10.2
(AT2)
TV Beko 11225(T) 10.2
(AT2)
TV BEKO 11225T 10.2
TV BEKO 11225T AT2
(AT02)
TV BEKO 11AK19PRO
(V1.2) SDA555
TV BEKO 11AK46 ST92195
TV BEKO 12 7
SDA5535-A056
TV BEKO 12.1
(6BZ.190...)
TV BEKO 12.3
(7LY.190-...)
TV BEKO 12.4/12.5
(A99.1
TV BEKO 12.6
(G99.190...)
TV BEKO 12.7
(C71.190-02
TV BEKO 12.7
(G70.190-...
TV BEKO 12.8
TV BEKO 12.8
(G80.190...)
TV Beko 12220(T) (NX)
10.2 (AT2)
TV BEKO 12220T AT2
(AT02)
TV BEKO 14 2
TDA9561(67), TDA9563(65)
TV BEKO 14.1
(7SZ.190...)
TV BEKO 14.1
(7SZ.190-12
TV BEKO 14.2
(S99.190-08
TV BEKO 14.2
(U99.190...)
TV BEKO 14.2
(U99.190-07
TV Beko 14212T( R )
12,1
TV BEKO 14213T 12.1
TV Beko 14213T( R )
12,1
TV Beko 14242-8TDS
12,8
TV BEKO 14242T 12.4
TV Beko 14242T( R )
12,4 PCB marked A99.190-16
TV BEKO 14272TDS
TV Beko 14272TDS 12,7
2003 £70, 2004 £65 PCB marked G70.190-03
TV BEKO 14B7M03TXC
12.5
TV Beko 14B9T46TS
SDA5535-A049 24C04 smd
TV BEKO 14EK3 12.7
TV Beko 15225 (T) (NX)
10.2 (AT2)
TV BEKO 15225T 10.2
TV BEKO 15225T AT2
(AT02)
TV Beko 15325(NX)(T)
10.3 (AT3)
TV BEKO 16 1
ST92195C7/64K A-OSD
TV Beko 16228 (T) (NX)
10.2 (AT2)
TV BEKO 16228T 10.2
TV BEKO 16228T/NX AT2
(AT02)
TV Beko 16328(NX) 10.3
(AT3)
TV Beko 17125(NX)(T)
11,1
TV Beko 17325(T)( R )
10.3 (AT3)
TV Beko 18221 (T) (NX)
10.2 (AT2)
TV BEKO 1922 inx AT2
(AT02)
TV Beko 19221 10.2
(AT2)
TV Beko 19321(NX)(T)
10.3 (AT3)
TV Beko 19321N AT3
chassis
TV Beko 19421(T) 10.4
(AT4)
TV BEKO 20.2 (100Hz)
(U
TV Beko 20120NX 11,1
TV Beko 20212R (T)
12,1
TV Beko 20242-8R 12,8
TV Beko 20242T ( R )
12,4
TV Beko 20272TDS 12,7
PCB marked G70.190-03
TV Beko 20320(NX)(T)
10.3 (AT3)
TV Beko 20420(T) 10.4
(AT4)
TV BEKO 20B7T01TXS
TV BEKO 20BCT01TXT
TV BEKO 20VC1 12.7
TV BEKO 210672 12.3
(7LY.190-04
TV BEKO 210672 12.3 ?
TV Beko 21211T 12,1
TV Beko 21241T(RD)
12,4
TV Beko 21411(ND) 14,1
TV BEKO 21B7T02 12.5
TV BEKO 21B9T44S 12.6
(?)
TV BEKO 21B9T44TXS
12.6
TV BEKO 21GS7 12.7
TV BEKO 22.1
TV BEKO 22.2 (100Hz)
TV Beko 24242TS 12,5
TV Beko 25121(T) 11,1
TV Beko 25411ND 14,1
TV Beko 25421( R )(T)
10.4 (AT4)
TV Beko 26114( R ) ( T
) 11,1
TV Beko 26414( R )(T)
10.4 (AT4)
TV BEKO 26414R 10.4
TV Beko 27120 11,1
TV BEKO 27420 10.4
TV Beko 27420(A)( R )
10.4 (AT4)
TV Beko 28128(NX)(T)
11,1
TV BEKO 28128NX 11.1
TV BEKO 2812NX 11.1
(110°)
TV Beko 28328(NX)(T)
10.3 (AT3)
TV BEKO 28328SX 10.3
((TXT Pal 9/
TV Beko 28328SX Siesta
3A SDA20563-A518 SDA2586-5
TV Beko 28411(ND) 14,1
PCB 7SZ.190-09
TV Beko 28412(VND)
14,1
TV Beko 28416(ND) 14,1
PCB marked 7SZ.190-16 or 7SZ.190-19 IC601 MC44608P40, fet 2SK254LOPTx Termal
058.834-TR2 (003311167, HR8700), chopper 059.834-EL1(2354.0029), C
TV Beko 28421(NDS)
14,2
TV Beko 284216(WNS)
14,2
TV BEKO 284216WNS 14.2
TV Beko 28422(NDS)
14,2 PCB marked U99.190
TV Beko 284248(WNS)
14,2
TV Beko 28426(NDS)(ND)
14,2
TV BEKO 28426NDS 14.2
TV BEKO 28B4T05 14.1
(?)
TV BEKO 28BCT05NTX
20.2 (100Hz)
TV BEKO 28BCT05NX 20.2
TV BEKO 28BCT07NSX
20.2 (100Hz)
TV BEKO 28BCT22NTX
20.2
TV BEKO 28BCT22NX 20.2
(100Hz)
TV BEKO 28BCT28NTX
20.2 (100Hz)
TV BEKO 28BCT28NX 20.2
(100Hz)
TV BEKO 28BCT28SXS
20.2 (100Hz)
TV BEKO 28BCTL2SX 20.2
TV BEKO 28BCTL2SXS
100Hz 20.2 (100Hz)
TV BEKO 28BCTL2SXS
20.2 (100Hz)
TV BEKO 28C3T39TX
TV BEKO 28CZ10RX 14.2
TV BEKO 28P1TL3NX 11.1
TV BEKO 28T16NX
TV Beko 29121(NX) 11,1
TV Beko 29321(NX) 10.3
(AT3)
TV BEKO 29BCT12NTX
20.2
TV BEKO 29BCT12NXS
20.2 (100Hz)
TV BEKO 29BCT12S 20.2
(100Hz)
TV BEKO 29BCT12STP
20.2 (100Hz)
TV BEKO 29BCT17NTX
20.2 (100Hz)
TV BEKO 29BCT17NXS
20.2 (100Hz)
TV BEKO 29BCT23NXS
20.2 (100Hz)
TV BEKO 29BCT23ST 20.2
(100Hz)
TV BEKO 29BCT24NTX
20.2 (100Hz)
TV BEKO 29BCT25 20.2
(100Hz)
TV BEKO 29BCT25NSX
20.2 (100Hz)
TV BEKO 29BCT25NTX
20.2
TV BEKO 29PFT12 20.2
TV Beko 30128(NX)(T)
11,1
TV Beko 30128T 11,1
TV Beko 30128T 11.1
chassis
TV Beko 30328(NX)(T)
10.3 (AT3)
TV Beko 31114 11,1
TV Beko 31414 10.4
(AT4)
TV Beko 32120( R )( T
) 11,1
TV Beko 32420( R )
10.4 (AT4)
TV Beko 32426(NDS)(ND)
14,2
TV BEKO 32426NDS 14.2
TV BEKO 32BCT10NTX
20.2 (100Hz)
TV BEKO 32BCT20NTX
20.2
TV BEKO 32BCT20NXS
20.2 (100Hz)
TV BEKO 32BCT20STP
20.2 (100Hz)
TV BEKO 32BCT21 20.2
(100Hz)
TV BEKO 32BCT21NTX
20.2 (100Hz)
TV BEKO 32BCT35NX 20.2
(100Hz)
TV BEKO 32BCT42 20.2
(100Hz)
TV BEKO 32CZ10RX 14.2
TV BEKO 33BCTL5NSX
20.2 (100Hz)
TV BEKO 33BCTL5NTX
20.2 (100Hz)
TV BEKO 33BCTL5NX 20.2
(100Hz)
TV BEKO 33P1TL5
TV Beko 34133ND 11,1
TV Beko 35228PD 11,2
TV Beko 36233PD 11,2
PCB marked 6SZ.190-11
TV Beko 38328NX 10.3
(AT3)
TV BEKO 5025 16.1
(ZA4.190-1x
TV BEKO 5025S 16.1
(ZA4.190-09
TV BEKO 7SZ 190-09
14.1 (7SZ.190-09
TV BEKO C7-C8
TV Beko COLOR TV69P
SDA20563-A518 SDA2586-5
TV BEKO CTV889
TV BEKO E21T2XB 11.1?
(6WL110)
TV BEKO N33TL5NTX 14.1
TV BEKO NR 28B4T07
14.1 (7SZ-190-17
TV BEKO NR14272R 12.7
?
TV BEKO NR14B9T46S
12.6
TV BEKO NR20B3M07 12.1
TV BEKO NR20B6T01 12.4
TV BEKO NR21B6T02 12.4
TV BEKO NR21C2TG1 12.8
TV BEKO NR21T44TXS E1
(Z50.190-05)
TV BEKO NR26114RDG
11.1 ?
TV BEKO NR28328SX 10.3
TV BEKO NR28411ND 14.1
?
TV BEKO NR29BCT23 20.2
(100Hz)
TV BEKO NR33BCTL5NSX
20.2
TV BEKO NR6B1
TV BEKO NR7KQ 11AK20M
TV BEKO NRP0625 14.1
TV BEKO NRPM1121XB
12.6 ?
TV BEKO NRPM1121XBS
12.6
TV BEKO OK2937PSX1P
22.1 (ZA1.190-14)
TV Beko P0528NK
SAA5563PS/M3 24C08
TV BEKO P0528NX 14.1
TV Beko P0528NX
SAA5563PS/M3/CZ6084/P1/10 24C08
TV BEKO P0528NXS 14.1
? (14.2?)
TV BEKO P0625 14.1
TV BEKO P0625NX 14.1
(7SZ.190-16
TV Beko P0625NX
SAA5563PS/M3 2408
TV BEKO PM0314XBS 12.8
TV BEKO PM1121XB 12.1
TV BEKO PM1121XB 12.8
TV BEKO PM1121XB
12.4/12.5 SDA5521, SDA5552
TV BEKO PM1121XBS 12.5
? (raczej 12.
TV Beko PM1121XBS
SDA555XFL-A14 2404N
TV BEKO PT1229NX
TV BEKO PT1628NX 14.1
TV BEKO PT3421NX 12.3
TV BEKO PVB5180
(6UZ.190-02)
TV BEKO RF6682 (późniejszy
model) 14.2
TV BEKO RF6682 (wcześniejszy
model) 14.1
TV BEKO RF6683
(2003-2004r.) 11AK37
TV BEKO RF6683
(2005r.) 11AK49
TV BEKO RF6683VPL
11AK45
TV BEKO RF6684
(2003-2004r.) 11AK37
TV BEKO RF6684
(2005r.) 11AK45
TV BEKO
RF6685VPLSIL/C7 C7
TV BEKO RF6686
(2005r.) 11AK49
TV BEKO RF6694
(2003r.) 11AK45
TV BEKO SIESTA AT3
SDA20563-A512 (A514)
TV BEKO SPACE MASTER
SASI11
TV BEKO STX112
TV BEKO T06
TV BEKO T570SX 20.2
(100Hz)
TV BEKO T670VDNX 20.2
(100Hz)
TV BEKO T684VDNX 20.2
(100Hz)
TV BEKO T82 14.2
TV BEKO TCM10502 20.2
TV BEKO TG1 21NX 14.1
TV BEKO TV79R 10.3 ?
TV Beko TV84A Siesta 3
SDA20562-A508 SDA2586-5
TV BEKO TVB10280S 22.1
(ZA1.190-07)
TV BEKO TVB10540 14.2
(S99.190-07
TV BEKO TVB1135S E1
TV BEKO TVB1332 10.2
(?)
TV BEKO TVB2031 11.1
TV BEKO TVB2606
TV BEKO TVB2830 11.1
TV BEKO TVB30082S
TV BEKO TVB3090 DOLBY
11.2
TV BEKO TVB3130 11.1
TV BEKO TVB3201 11.1
TV BEKO TVB5180 (6UZ.
...)
TV Beko TVB5180
SDA30C263 + EPROM M27C2001-15FI SDA2586-5
TV BEKO TVB5230 14.1 !
(7SZ.190-0
TV BEKO TVB5635 14.1
(7SZ 190)
TV BEKO TVB6790
TV BEKO TVB9982S 20.2
(100Hz)
TV BEKO TVC32BCT21PF
20.2 (100Hz)
TV BEKO V30 14.2
TV BEKO WS6680SIL 20.2
? (U99.190-
TV BEKO YUGO 57Y (Satcom)
(Satcom)
TV BEKO YUGO CTV58Y
|
