Model: BE2, BE2A,
KV-M1400A, KV-M1400B, KV-M1400B2, ...
Subject: NO
POWER.(PS801)
Symptom: No power
Cause: PS801 is
open
Remedy: Change
PS801 Check Q802 before changing PS801
Model: BE2, BE2A,
KV-M1400A, KV-M1400B, KV-M1400B2, ...
Subject: NO
PICTURE.(R801)
Symptom: No picture
All secundairy tensions are present, only high tension is missing
Cause: R 801 is
open
Remedy: Change this
R801
Model: BE2, BE2A,
KV-M1400A, KV-M1400B, KV-M1400B2, ...
Subject: PIN
CUSHION DEFORMATION.(C806)
Symptom: Pin
cushion deformation
Cause: Value of C
806 has changed
Remedy: Change this
capacitor Pin correction adjustment doesn't work anymore
Model: BE2, BE2A,
KV-M1400A, KV-M1400B, KV-M1400B2, ...
Subject: NO
PICTURE.(C329)
Symptom: No picture
Cause: C 329 is
defekt.
Remedy: Change C
329 This capacitor blanks the picture during start-up
Model: BE2, BE2A,
KV-M1400A, KV-M1400B, KV-M1400B2, ...
Subject: NOISY
AUDIO.(L107)
Symptom: Noisy
audio
Cause: L 107 is
defekt
Remedy: Change this
L 107
Model: BE2, BE2A,
KV-M1400A, KV-M1400B, KV-M1400B2, ...
Subject: NO
VERTICAL DEFLECTION.(C524)
Symptom: No
vertical deflection
Cause: C 524 is
defekt.(vertical oscillator)
Remedy: Change this
capacitor
Model: BE2, BE2A,
KV-M1400A, KV-M1400B, KV-M1400B2, ...
Subject: NOISY
COLOUR.(Q303)
Symptom: Noisy
colour
Cause: Q303 is
leaking
Remedy: Change this
transistor
Model: BE2, BE2A,
KV-M1400A, KV-M1400B, KV-M1400B2, ...
Subject: NO
PICTURE, SCART IS OK.(C521)
Symptom: No
picture, scart is OK
Cause: C 521 is
defekt
Remedy: Change this
capacitor TU AGC on pin 6 of TDA8304B is O V
Model: BE2A
Subject: MEMORY IC
INITIALISATION
Symptom: MEMORY IC
INITIALISATION
Cause: AFTER
REPLACING THE MEMORY IC, THE BRIGHTNESS LEVEL BECOMES MAXIMUM WHEN THE RESET
BUTTON IS PRESSED .
Remedy: AFTER
CHANGING THE MEMORY IC ST24C02AB1 (8-759-043-86), THE FOLLOWING
INITIALISATION PRO
Model: BE2A
Subject: SYSTEM
CONTROLLER REPLACEMENT
Symptom: SYSTEM
CONTROLLER REPLACEMENT
Cause: MICROCONTROLLER IC001 PCA84C840P/016 (8-759-062-07) HAS BEEN REPLACED BY A
NEW TYPE
PCA84C840P/016A (8-759-199-00)
Remedy: WHEN
INSTALLING THE NEW IC, IT IS NECESSARY TO CHANGE THE FOLLOWING COMP
Model: BE2A
Subject: FAILURE OF
IC501
Symptom: FAILURE OF
IC501
Cause: FAILURE OF
IC501 (V-OUT)
Remedy: CHANGE IC
501 FROM THE TYPE µPC1488 (8-759-113-05) OR THE TYPE µPC1498 (8-759-113-13)
TO THE
TYPE LA7832 (8-759-160-20). ADD A 820 PF CAPACITOR
(1-102-212-00) BETWEEN PIN 5
Model: BE2A
Subject: FAILURE OF
Q802 (H-OUT TR)
Symptom: FAILURE OF
Q802 (H-OUT TR)
Cause: FAILURE OF
Q802 (H-OUT TR)
Remedy: REPLACE
Q802 WITH THE IMPROVED VERSION (BU508AS2H, P/N: 8-729-022-87) . NOTE THAT
FOR 14"
AND 16" MODELS THE ORIGINAL TYPE BU508AS2 (8-729-925-64)
SHOULD BE USED.
Model: BE2A
Subject: MEMORY IC
INITIALISATION, BRIGHTNESS LEVEL TOO HIG
Symptom: MEMORY IC
INITIALISATION, BRIGHTNESS LEVEL TOO HIGH
Cause: AFTER
REPLACING THE MEMORY IC, THE BRIGHTNESS LEVEL BECOMES MAXIMUM WHEN THE RESET
BUTTON IS PRESSED
Remedy: AFTER
CHANGING THE MEMORY IC ST24C02AB1 (8-759-043-86), THE FOLL
Model: BE2A
Subject: No power
Symptom: No power
Cause: PS801 is
open
Remedy: Change
PS801 Part(s): 1-532-679-91 (PS801)
Model: BE2A
Subject: No power
Defect components: fuse, 47 K resistors
Symptom: No power
Defect componentSymptom :fuse, 47 K resistors, ERD 2808, STRS54041, R 606,
TDA3505,TDA3827, TDA7245.
Cause: Lightening
Remedy: Change
these components. Part(s): ()
Model: BE2A
Subject: No picture
All secundairy tensions are present, o
Symptom: No picture
All secundairy tensions are present, only high tension is missing
Cause: R 801 is
open
Remedy: Change this
R801 Part(s): 1-217-778-11 (R801)
Model: BE2A
Subject: Pin
cushion deformation
Symptom: Pin
cushion deformation
Cause: Value of C
806 has changed
Remedy: Change this
capacitor Part(s): 1-136-187-11 (C 806)
Model: BE2A
Subject: No picture
Symptom: No picture
Cause: C 329 is
defekt.
Remedy: Change C
329 Part(s): 1-131-367-00 (C329)
Model: BE2A
Subject: Noisy
audio
Symptom: Noisy
audio
Cause: L 107 is
defekt
Remedy: Change this
L 107 Part(s): 1-408-410-00 (L 107)
Model: BE2A
Subject: No
vertical deflection
Symptom: No
vertical deflection
Cause: C 524 is
defekt.(vertical oscillator)
Remedy: Change this
capacitor Part(s): 1-106-228-00 (C 524)
Model: BE2A
Subject: Noisy
colour
Symptom: Noisy
colour
Cause: Q303 is
leaking
Remedy: Change this
transistor Part(s): 8-729-120-28 (Q 303)
Model: BE2A
Subject: No
picture, scart is OK
Symptom: No
picture, scart is OK
Cause: C 521 is
defekt
Remedy: Change this
capacitor Part(s): 1-131-377-00 (C 521)
