Model: AE1, AE1A, AE1B, KV-211XML, KV-211XMTL, ...

Subject: NO PICTURE OR DARK PICTURE.(D803,R807)

Symptom: No picture or dark picture

Cause: R 807 is open

Remedy: Change R807 (1K,1 W) and change D803 by another one(RGP02-17)

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: SET GOES IN STAND-BY AFTER A WHILE.(C025,C026)

Symptom: Set goes in stand-by after a while

Cause: Bad reset

Remedy: Change C025 and C026 (4,7 µF)

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: REPROGRAMMING OF PRESETS DOESN'T WORK ANYMORE.(L80

Symptom: Reprogramming of presets doesn't work anymore.

Cause: -30V at pin 2 of IC003 is missing. L807 is open.(-30V is made by FBT)

Remedy: Change L807 The tension you normally messure having this problem is -15V

Model: AE1, AE1A, AE1B, KV-211XML, KV-211XMTL, ...

Subject: NO PICTURE.(C327)

Symptom: No picture

Cause: C327 is defekt on the chroma board.

Remedy: Change C327(0.01µF)

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: DARK PICTURE.(TDA6600)

Symptom: Dark picture

Cause: TDA6600 on the KS board is defekt.

Remedy: Change TDA6600 Perhaps due to overvoltage

Model: AE1, AE1A, AE1B, AE1C, KV-211XML, ...

Subject: INTERMITTENT NO POWER.(CF501)

Symptom: Intermittent no power

Cause: CF501 is unstabel and causes the set to stop running after a while, or sometimes no power up at all.

Remedy: Change CF501.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: No power.(C025,C026)

Symptom: No power.(bad reset)

Cause: C025 is short and hence the reset circuit doesn't work anymore.

Remedy: Change this capacitor.Change preventifly also C026. Sometimes the set starts and stops after a while.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: NO POWER OR NO SOUND.(IC251)

Symptom: No power or no sound. Due to shortage of IC251 the set doesn't power up.

Cause: 251 (. Due to shortage of IC251 the set doesn't power up.)

Remedy: Change power amp. Both symtoms can occur: No sound, or complete shortage causes no power

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: SIZE OF PICTURE CHANGES INTERMITTENT.(D501)

Symptom: Size of picture changes intermittent.

Cause: D501

Remedy: Change this diode.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: INTERMITTENT NO COLOUR.(X332)

Symptom: Intermittent no colour.

Cause: X 332

Remedy: Change X 332 Normally the variabel capacitor of a AE1 chassis is not in cause. (white capacitor)

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: NO PICTURE, NO OSD,TXT AND SOUND OK.(R812)

Symptom: No picture, no OSD, TXT and sound OK.

Cause: R 812 (68 K)

Remedy: Change R812. Normally R 812 is open.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: RATTLE NOISE, ALSO IN STAND-BY.

Symptom: Rattle noise, also in stand-by.

Cause: Bad contacts on audio heathsink.

Remedy: Resolder.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: NO POWER, WHISTLING NOISE.(FBT)

Symptom: No power, whistling noise.

Cause: Flyback transformer.

Remedy: Change FBT.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: NO POWER, SET GOES IN PROTECTION.(C517)

Symptom: No power, set goes in protection.

Cause: C 517 value has changed.

Remedy: Change C 517.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: NO POWER, SET STOPS RUNNING AFTER A WHILE.(R614)

Symptom: No power, or set stops running after a while.

Cause: R 614 has a bad contact.

Remedy: Change R 614. If the damage to the D-board is to big, please check SB TV01392.

Model: AE1, AE1A, AE1B, AE1C, KV-211XML, ...

Subject: NO POWER.(D611)

Symptom: No power.

Cause: Lightening. D 611 is short.

Remedy: Change D611

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: PICTURE IS VERTICAL UNSTABEL.(C592)

Symptom: Picture is vertical unstabel.

Cause: C 592.

Remedy: Change C 592. Symptom is more visabel with high brigtness level!

Model: AE1, AE1A, AE1B, KV-211XML, KV-211XMTL, ...

Subject: NO PICTURE, SOUND OK.(D803,R807)

Symptom: No picture, sound OK.

Cause: D 803 is defect and hence R 807 goes defect.

Remedy: Change D 803 by improved type of diode RGP02-17. Check SB TV02190.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: INTERMITTENT NO PICTURE, SOMETIMES NEGATIVE PICTUR

Symptom: Intermittent no picture, sometimes negative picture.

Cause: Bad contact T 101, T102, T103.

Remedy: Resolder these coils.

Model: AE1, AE1A, AE1B, AE1C, KV-211XML, ...

Subject: PIN DISTORTION.(C815,L806)

Symptom: Pin distortion.

Cause: C 815 is defect and hence L 806 burns.

Remedy: Change both components. Defect is visable when coil L806 has burned.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: BLANKING LINES ON THE PICTURE.(R544)

Symptom: Blanking lines on the picture.

Cause: R 544 value has changed.

Remedy: Change this resistor.

Model: AE1, AE1A, AE1B, AE1C, KV-211XML, ...

Subject: NO PICTURE, ONLY HORIZONTAL LINE.(IC502,R530)

Symptom: No picture, only horizontal line.

Cause: IC 502 is defect.

Remedy: Change IC 502 and check also R 530. Change also C531 and C532.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: SET GOES OFF IN STAND-BY (D607,R623)

Symptom: Set goes off in stand-by.

Cause: D 607 and R 623 are defect.

Remedy: Change both components.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: FLICKERING OR NEGATIVE PICTURE DURING START- UP.

Symptom: Flickering picture.

Cause: C 625 is defect and hence 12V output is not correct.

Remedy: Change this capacitor.

Model: AE1, AE1A, AE1B, AE1C, KV-211XML, ...

Subject: POOR VERTICAL LINEARITY.(C531,C532)

Symptom: Poor vertical linearity.

Cause: C 531 :Top of the picture. C 532 :Bottom of the picture.

Remedy: Change both capacitors.

Model: AE1, AE1A, AE1B, AE1C, KV-211XML, ...

Subject: BLANKING LINES ON THE PICTURE.(R722)

Symptom: Blanking lines on the picture.

Cause: R 722 value has changed.

Remedy: Change this resistor.

Model: AE1, AE1A, AE1B, AE1C, KV-211XML, ...

Subject: PURITY ERROR.(POSITION DEFLECTION YOKE)

Symptom: Purity error.

Cause: Deflection Yoke has changed position backwards.

Remedy: Complete readjustement of purity and linearity as explained in the service manual. Fix scew of the DY securely

and put locking compound to prevent repositio

Model: AE1, AE1A, AE1B, AE1C, KV-211XML, ...

Subject: NO POWER(D 606)

Symptom: No power

Cause: D 606 is leaking.

Remedy: Change this diode.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: NO POWER.(D632)

Symptom: No power.

Cause: D 632 is defect.

Remedy: Change this diode.

Model: AE1, KV-211XML, KV-211XMTL, KV-211XMTU, KV-211XMU, ...

Subject: SET SWITCHES IN STAND-BY.(C612)

Symptom: Set switches in stand-by.

Cause: C 612 has bad contact.

Remedy: Resolder C 612.

Model: AE1

Subject: V LINEARITY FAULT

Symptom: V LINEARITY FAULT

Cause: FAILURE OF C531

Remedy: REPLACE C531 (1-124-190-00) WITH A 680 µF±10%, 25V CAPACITOR (1-107-866-51)

Model: AE1

Subject: Intermittent no power

Symptom: Intermittent no power

Cause: CF501 is unstabel and causes the set to stop running after a while, or sometimes doesn't start at all.

Remedy: Change CF501. Part(s): 1-567-888-11 (CF501)

Model: AE1

Subject: No picture, sound OK.

Symptom: No picture, sound OK.

Cause: D 803 is defect and hence R 807 goes defect.

Remedy: Change D 803 by improved type of diode RGP02-17. Part(s): 8-719-976-64 (D 803)

Model: AE1

Subject: No picture, sound OK.

Symptom: No picture, sound OK.

Cause: D 803 is defect and hence R 807 goes defect.

Remedy: Change D 803 by improved type of diode RGP02-17. Part(s): 8-719-976-64 (D 803)

Model: AE1

Subject: Intermittent no picture, sometimes negative pictur

Symptom: Intermittent no picture, sometimes negative picture.

Cause: Bad contact T 101, T102, T103.

Remedy: Resolder these coils. Part(s): (T101)

Model: AE1

Subject: Set goes in stand-by after a while

Symptom: Set goes in stand-by after a while

Cause: Bad reset

Remedy: Change C025 and C026 (4,7 µF) Part(s): 1 102 125 00 (C025) 1 102 125 00 (C026

Model: AE1

Subject: Pin distortion.

Symptom: Pin distortion.

Cause: C 815 is defect and hence L 806 burns.

Remedy: Change both components. Part(s): Check SM (L806) Check SM (C815

Model: AE1

Subject: Blanking lines op the picture.

Symptom: Blanking lines op the picture.

Cause: R 544 value has changed.

Remedy: Change this resistor. Part(s): 1-247-745-11 (R 544)

Model: AE1

Subject: No picture, only horizontal line.

Symptom: No picture, only horizontal line.

Cause: IC 502 is defect.

Remedy: Change IC 502 and check also R 530. Change also C531 and C532. Part(s): 8-759-944-57 (C502) 1-249-448-11

(R530

Model: AE1

Subject: Reprogramming of presets doesn't work anymore.

Symptom: Reprogramming of presets doesn't work anymore.

Cause: -30V at pin 2 of IC003 is missing. L807 is open.(-30V is made by FBT)

Remedy: Change L807 Part(s): 1-408-242-00 (L 807)

Model: AE1

Subject: No picture

Symptom: No picture

Cause: C327 is defekt on the chroma board.

Remedy: Change C327(0.01µF) Part(s): 1-101-104-00 (C 327)

Model: AE1

Subject: Dark picture

Symptom: Dark picture

Cause: TDA6600 on the KS board is defekt.

Remedy: Change TDA6600 Part(s): 8-759-013-17 (IC 201)

Model: AE1

Subject: No power.(bad reset)

Symptom: No power.(bad reset)

Cause: C025 is short and hence the reset circuit doesn't work anymore.

Remedy: Change this capacitor.Change preventifly also C026. Part(s): 1-102-125-00 (C025) 1-102-125-00 (C026

Model: AE1

Subject: No power or no sound.

Symptom: No power or no sound.

Cause: IC 251

Remedy: Change power amp. Part(s): 8-759-803-31 (IC 251) 8-759-803-31 (IC251

Model: AE1

Subject: Size of picture changes intermittent.

Symptom: Size of picture changes intermittent.

Cause: D501

Remedy: Change this diode. Part(s): 8-719-911-19 (D501)

Model: AE1

Subject: Intermittent no colour.

Symptom: Intermittent no colour.

Cause: X 332

Remedy: Change X 332 Part(s): 1-567-131-11 (X 332)

Model: AE1

Subject: No picture, no OSD, TXT and sound OK.

Symptom: No picture, no OSD, TXT and sound OK.

Cause: R 812 (68 K)

Remedy: Change R812. Part(s): 1-244-917-00 (R 812)

Model: AE1

Subject: Rattle noise, also in stand-by.

Symptom: Rattle noise, also in stand-by.

Cause: Bad contacts on audio heathsink.

Remedy: Resolder. Part(s): (IC 601)

Model: AE1

Subject: No power, whistling noise.

Symptom: No power, whistling noise.

Cause: Flyback transformer.

Remedy: Change FBT. Part(s): Check SM (FBT)

Model: AE1

Subject: No power, set goes in protection.

Symptom: No power, set goes in protection.

Cause: C 517 value has changed.

Remedy: Change C 517. Part(s): 1-124-252-00 (C 517)

Model: AE1

Subject: No power, set goes in protection.

Symptom: No power, set goes in protection.

Cause: C 517 value has changed.

Remedy: Change C 517. Part(s): 1-124-252-00 (C 517)

Model: AE1

Subject: No power, or set stops running after a while.

Symptom: No power, or set stops running after a while.

Cause: R 614 has a bad contact.

Remedy: Change R 614. Part(s): 1-205-919-11 (R614)

Model: AE1

Subject: No power.

Symptom: No power.

Cause: Lightening. D 611 is short.

Remedy: Change D611 Part(s): Check SM (D 611)

Model: AE1

Subject: Picture is vertical unstabel.

Symptom: Picture is vertical unstabel.

Cause: C 592.

Remedy: Change C 592. Part(s): 1-124-122-11 (C592)

Model: AE1

Subject: Set goes off in stand-by.

Symptom: Set goes off in stand-by.

Cause: D 607 and R 623 are defect.

Remedy: Change both components. Part(s): 8-719-300-33 (D607) 1-249-385-00 (R623

Model: AE1

Subject: Flickering picture.

Symptom: Flickering picture.

Cause: C 625 is defect and hence 12V output is not correct.

Remedy: Change this capacitor. Part(s): 1-124-360-00 (C 625)

Model: AE1

Subject: Poor vertical linearity.

Symptom: Poor vertical linearity.

Cause: C 531 :Top of the picture. C 532 :Bottom of the picture.

Remedy: Change both capacitors. Part(s): 1-128-576-11 (C 532) 1-126-231-11 (C 531

Model: AE1

Subject: Blanking lines on the picture.

Symptom: Blanking lines on the picture.

Cause: R 722 value has changed.

Remedy: Change this resistor. Part(s): 1-244-941-00 (R 722)

Model: AE1

Subject: Purity error.

Symptom: Purity error.

Cause: Deflection Yoke has changed position backwards.

Remedy: Complete readjustement of purity and linearity as explained in the service manual. Part(s): (DY)

Model: AE1

Subject: No power

Symptom: No power

Cause: D 606 is leaking.

Remedy: Change this diode. Part(s): 8-719-300-33 (D 606)

Model: AE1

Subject: No power.

Symptom: No power.

Cause: D 632 is defect.

Remedy: Change this diode. Part(s): 8-719-110-16 (D 632)

Model: AE1

Subject: Set switches in stand-by.

Symptom: Set switches in stand-by.

Cause: C 612 has bad contact.

Remedy: Resolder C 612. Part(s): (C 612)

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: NO COLOUR, OR INTERMITTENT NO COLOUR.(CT302,CT332)

Symptom: No colour, or intermittenly no colour

Cause: Value of CT302 or CT332 changes, due to a bad contact internally

Remedy: Change variable capacitor by a fix one with a value of 15pF Check SB TV01500!!!!!!!

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: POWER SUPPLY POWERS UP, BUT STOPS AFTER 4 X.(C605,

Symptom: Power supply tryes to start up, but stops after 4 times

Cause: Values of C605 and C617 have changed, and due to this the load of the chassis is to high to start the set.

Remedy: Change C605 and C617. Warming up the capacitors can sometim

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: SOMETIMES NO POWER.(C504)

Symptom: TV doesn't start intermittenly, +B is 100V .

Cause: C 504 is defekt.

Remedy: Change C 504

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: SET CHANGES INTERMITTENT PRESELECTION.(IC005)

Symptom: Set changes intermittent his preselection.

Cause: Heating causes IC005 to become unstabel.(SDA 2546)

Remedy: Change this IC and reinitialate this new IC. Reinitialation: Start the set by pressing prog+ and prog-, and the

power switch at

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: PLOP NOISE.

Symptom: Plop-noise in speakers

Cause: 1)bad connections at IC251,IC261. 2)IC251 and IC261 are defect. 3)bad contacts at IC604 (5V stabilisor)

Remedy: 1)resoldering 2)change both ic's. 3)resolder IC604

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: NO PICTURE.(Q332)

Symptom: No picture

Cause: Q332 is short on B or B1 board.(chroma board)

Remedy: Change this Q332.

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: NO POWER.(C518, Q804)

Symptom: No power. (PSU is OK, but set doesn't start.

Cause: C518 value has changed and hence Q804 has become short. Sometimes even IC501 can be defect.

Remedy: Controle and change these components.

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: INTERMITTENT NO POWER ON OR CYCLIC POWER ON/OFF.(C604)

Symptom: Cyclic power ON/OFF (constantly)

Cause: Value off C604 has changed and hence the set doesn't power up any more.

Remedy: Change C604

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: PIN DISTORTION.(IC1501,D1506)

Symptom: Pin distortion.

Cause: IC 1501 and D 1506 are defect.

Remedy: Change both components.

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: FAULTY VERTICAL DEFLECTION.(R570)

Symptom: Faulty vertical deflection.

Cause: R 570 value has changed.

Remedy: Change this resistor.

Model: AE1A, AE1B, AE1C, KV2951A, KV-A2110B, ...

Subject: GREENISH PICTURE.(C339)

Symptom: Greenish picture.

Cause: C339 is defect.

Remedy: Change this capacitor.

Model: AE1A

Subject: V LINEARITY FAULT

Symptom: V LINEARITY FAULT

Cause: FAILURE OF C531

Remedy: REPLACE C531 (1-124-190-00) WITH A 680 µF±10%, 25V CAPACITOR (1-107-866-51)

Model: AE1A

Subject: Plop-noise in speakers

Symptom: Plop-noise in speakers

Cause: 1)bad connections at IC251,IC261. 2)IC251 and IC261 are defect. 3)bad contacts at IC604 (5V stabilisor)

Remedy: 1)resoldering 2)change both ic's. 3)resolder IC604 Part(s): 8-759-988-94 (IC251) 8-759-988-

Model: AE1A

Subject: No picture

Symptom: No picture

Cause: Q332 is short on B or B1 board.(chroma board)

Remedy: Change this Q332. Part(s): 8-729-216-22 (Q332)

Model: AE1A

Subject: No power. (PSU is OK, but set doesn't start.

Symptom: No power. (PSU is OK, but set doesn't start.

Cause: C518 value has changed and hence Q804 has become short. Sometimes even IC501 can be defect.

Remedy: Controle and change these components. Part(s): 1-124-902-00 (C 518) 8-729-304-50

Model: AE1A

Subject: No colour, or intermittenly no colour

Symptom: No colour, or intermittenly no colour

Cause: Value of CT302 or CT332 changes, due to a bad contact internally

Remedy: Change variable capacitor by a fix one with a value of 15pF. Part(s): 1 102 316 00 (CT 332)

Model: AE1A

Subject: No picture or dark picture

Symptom: No picture or dark picture

Cause: R 807 is open

Remedy: Change R807 (1K,1 W) and change D803 by another one(RGP02-17) Part(s): 871997664 (D 803) 121777811 (R

807

Model: AE1A

Subject: Power supply tryes to start up, but stops after 4

Symptom: Power supply tryes to start up, but stops after 4 times

Cause: Values of C605 and C617 have changed, and due to this the load of the chassis is to high to start the set.

Remedy: Change C605 and C617. Part(s): 1-124-484-11 (C 605) 1-124-1

Model: AE1A

Subject: TV doesn't start intermittenly, +B is 100V .

Symptom: TV doesn't start intermittenly, +B is 100V .

Cause: C 504 is defekt.

Remedy: Change C 504 Part(s): 1-163-121-00 (C 504)

Model: AE1A

Subject: Cyclic power ON/OFF (constantly)

Symptom: Cyclic power ON/OFF (constantly)

Cause: Value off C604 has changed and hence the set doesn't power up any more.

Remedy: Change C604 Part(s): 1-124-484-11 (C604)

Model: AE1A

Subject: Pin distortion.

Symptom: Pin distortion.

Cause: IC 1501 and D 1506 are defect.

Remedy: Change both components. Part(s): 8-759-942-16 (IC1501) 8-719-931-66 (D 1506

Model: AE1A

Subject: Vertical folding picture.

Symptom: Vertical folding picture.

Cause: R 570 value has changed.

Remedy: Change this resistor. Part(s): 1-216-045-00 (R 570)

Model: AE1A

Subject: Greenish picture.

Symptom: Greenish picture.

Cause: C339 is defect.

Remedy: Change this capacitor. Part(s): 1-106-220-00 (C339)

Model: AE1B, AE1C, KV2951A, KV-A2110B, KV-A2111A, ...

Subject: DARK PICTURE.(Q608)

Symptom: Picture is very dark.

Cause: Q608 is leaking

Remedy: Change Q608

Model: AE1B, AE1C, KV2951A, KV-A2110B, KV-A2111A, ...

Subject: NO POWER.(C611,Q602)

Symptom: No power

Cause: Q 602 is short.

Remedy: Change Q 602, but change also C611. This capacitor has maybe changed value and hence Q 602 goes short.

Control also R600 and R643 before powering on the set.

Model: AE1B, AE1C, KV2951A, KV-A2110B, KV-A2111A, ...

Subject: NO POWER.(D1504)

Symptom: No power

Cause: The TDA 2028 gives no H-pulses at the start up. When we measure at pin 12 , we have 5V DC. In fact D1504 is

leaking. (D1504 you can find on the J board.)

Remedy: Change D 1504.

Model: AE1B

Subject: V LINEARITY FAULT

Symptom: V LINEARITY FAULT

Cause: FAILURE OF C531

Remedy: REPLACE C531 (1-124-190-00) WITH A 680 µF±10%, 25V CAPACITOR (1-107-866-51)

Model: AE1B

Subject: INTERMITTENTLY NO SOUND, OR A CRACKING NOISE IS AU

Symptom: INTERMITTENTLY NO SOUND, OR A CRACKING NOISE IS AUDIBLE, ESPECIALLY WHEN SUBJECT TO

MECHANICAL SHOCKS

Cause: HE PROBLEM IS CAUSED BY THE POOR SOLDERING OF THE PINS OF IC 261 TDA 2052 (AUDIO OUT, R-CH)

ON THE D-BOARD. MOSTLY PINS 2,4 A

Model: AE1B

Subject: Picture is very dark.

Symptom: Picture is very dark.

Cause: Q608 is leaking

Remedy: Change Q608 Part(s): 8-729-120-28 (Q 608)

Model: AE1B

Subject: No power

Symptom: No power

Cause: Q 602 is short.

Remedy: Change Q 602, but change also C611. This capacitor has maybe changed value and hence Q 602 goes short.

Part(s): 8-729-209-02 (Q602) 1-124-910-11 (C611

Model: AE1B

Subject: Picture is deformed on the lower part.

Symptom: Picture is deformed on the lower part.

Cause: Value of C531 has changed.

Remedy: Change C531 with same value(680 µF)but use a capacitor of 105° Part(s): 1 111 123 11 (C531)

Model: AE1B

Subject: No power

Symptom: No power

Cause: The TDA 2028 gives no H-pulses at the start up. When we measure at pin 12 , we have 5V DC. In fact D1504 is

leaking. (D1504 you can find on the J board.)

Remedy: Change D 1504. Part(s): 8-719-911-19 (D 1504)

Model: AE1C, KV2951A, KV-A2110B, KV-A2111A, KV-A2111B, ...

Subject: NO PICTURE OR INTERMITTENT NO PICTURE.(Q608)

Symptom: No picture or intermittent no picture

Cause: Q 608 is leaking and changes SCP.

Remedy: Change Q608

Model: AE1C, KV2951A, KV-A2110B, KV-A2111A, KV-A2111B, ...

Subject: UNSTABEL IMAGE AND LOSS OF COLOUR.(IC310, SET WITH DIG. COMB FILTER)

Symptom: Unstabel image and los of colour.

Cause: IC310 (CXD2011Q)has bad contacts.

Remedy: Resolder IC 310

Model: AE1C, KV2951A, KV-A2110B, KV-A2111A, KV-A2111B, ...

Subject: CYCLIC POWER ON/OFF.(C605,C617)

Symptom: Cyclic power ON/OFF(3 or 4 times)

Cause: Values off C605 and C617 have changed.

Remedy: Change both capacitors This phenomen can also be caused by IC 601

Model: AE1C, KV2951A, KV-A2110B, KV-A2111A, KV-A2111B, ...

Subject: INTERMITTENT NO PICTURE.(IC02)

Symptom: Intermitent no picture

Cause: IC02 on the V-board is defekt(SAA5246P/E).

Remedy: Change this IC02 An easy way to know if V-board is in cause, is to pull out this board and to make the connection

TXT-CUT at the componentside of the D-boar

Model: AE1C, KV2951A, KV-A2110B, KV-A2111A, KV-A2111B, ...

Subject: MOZAIK NOISE.(IC310)

Symptom: Mosa< noise>Cause: IC310 (CXD2011Q) is defect.

Remedy: Change IC310

Model: AE1C, KV2951A, KV-A2110B, KV-A2111A, KV-A2111B, ...

Subject: LOSS OF COLOUR AND SYNC WHEN EDITING VIDEOTAPES.

Symptom: Loss of colour and sync by editing videotapes.

Remedy: Put a capacitor of 33 microF between pin 9 and ground. Only for Models equipped with a digital comb filter.

Model: AE1C, KV2951A, KV-A2110B, KV-A2111A, KV-A2111B, ...

Subject: NO PICTURE.(Q330)

Symptom: No picture

Cause: Q330 is defect.

Remedy: Change this transistor

Model: AE1C

Subject: V LINEARITY FAULT

Symptom: V LINEARITY FAULT

Cause: FAILURE OF C531

Remedy: REPLACE C531 (1-124-190-00) WITH A 680 µF±10%, 25V CAPACITOR (1-107-866-51)

Model: AE1C

Subject: AFTER SWITCHING INTO STANDBY MODE IT'S IMPOSSIBLE

Symptom: AFTER SWITCHING INTO STANDBY MODE IT'S IMPOSSIBLE TO SWITCH THE SET ON AGAIN

Cause: +B VOLTAGE TOO LOW (<130V) WHICH PREVENTS SWITCHING ON THE TV-SET FROM STANDBY

Remedy: ADJUST RV601 (STANDBY +B VOLTAGE ADJ.) FOR CORRECT +B VOLTAGE

Model: AE1C

Subject: V-SIZE TOO LOW

Symptom: V-SIZE TOO LOW

Cause: THE VALUE OF R522 CHANGED WHICH RESULTS IN A TOO HIGH +B VOLTAGE (±160V)

Remedy: REPLACE R522

Model: AE1C

Subject: BLACK HORIZONTAL STRIPES OVER THE ENTIRE PICTURE

Symptom: BLACK HORIZONTAL STRIPES OVER THE ENTIRE PICTURE

Cause: VALUE OF R544 CHANGED

Remedy: REPLACE R544

Model: AE1C

Subject: TOP PART OF PICTURE EXPANDED, BOTTOM PART COMPRESS

Symptom: TOP PART OF PICTURE EXPANDED, BOTTOM PART COMPRESSED

Cause: CAPACITOR C521 DEFECT

Remedy: REPLACE C521

Model: AE1C

Subject: VERTICAL LINES CURVED IN THE CORNERS OF THE SCREEN

Symptom: VERTICAL LINES CURVED IN THE CORNERS OF THE SCREEN

Cause: C1514 DEFECT

Remedy: REPLACE C1514

Model: AE1C

Subject: INTERMITTENTLY NO SOUND, OR A CRACKING NOISE IS AU

Symptom: INTERMITTENTLY NO SOUND, OR A CRACKING NOISE IS AUDIBLE, ESPECIALLY WHEN SUBJECT TO

MECHANICAL SHOCKS

Cause: HE PROBLEM IS CAUSED BY THE POOR SOLDERING OF THE PINS OF IC 261 TDA 2052 (AUDIO OUT, R-CH)

ON THE D-BOARD. MOSTLY PINS 2,4 A

Model: AE1C

Subject: INTERFERENCE (BEAT) IN THE PICTURE OF MODELS EQUIP

Symptom: INTERFERENCE (BEAT) IN THE PICTURE OF MODELS EQUIPPED WITH THE TUNER BTP-EC401.

Cause: STRONG UHF SIGNALS CAUSE INTERFERENCE ON THE VHF SIGNALS.

Remedy: REPLACE THE TUNER WITH THE IMPROVED TYPE WITH PART NUMBER 1-465-611-23. NOTE TH

Model: AE1C

Subject: No picture or intermittent no picture

Symptom: No picture or intermittent no picture

Cause: Q 608 is leaking and changes SCP.

Remedy: Change Q608 Part(s): 8-729-120-28 (Q 608)

Model: AE1C

Subject: Unstabel image and los of colour.

Symptom: Unstabel image and los of colour.

Cause: IC310 (CXD2011Q)has bad contacts.

Remedy: Resolder IC 310 Part(s): 8-752-337-07 (IC310)

Model: AE1C

Subject: Set changes intermittent his preselection.

Symptom: Set changes intermittent his preselection.

Cause: Heating causes IC005 to become unstabel.(SDA 2546)

Remedy: Change this IC and reinitialate this new IC. Reinitialation: Start the set by pressing prog+ and prog-, and the

power switch at the

Model: AE1C

Subject: Cyclic power ON/OFF(3 or 4 times)

Symptom: Cyclic power ON/OFF(3 or 4 times)

Cause: Values off C605 and C617 have changed.

Remedy: Change both capacitors Part(s): 1-124-484-11 (C 605) 1-124-122-11 (C 617) 8-759-988-95 (IC 601)

Model: AE1C

Subject: Intermitent no picture

Symptom: Intermitent no picture

Cause: IC02 on the V-board is defekt(SAA5246P/E).

Remedy: Change this IC02 Part(s): 8-759-510-46 (IC02)

Model: AE1C

Subject: Mosaïc noise

Symptom: Mosaïc noise

Cause: IC310 (CXD2011Q) is defect.

Remedy: Change IC310 Part(s): 8-752-337-07 (IC310)

Model: AE1C

Subject: Loss of colour and sync by editing videotapes.

Symptom: Loss of colour and sync by editing videotapes.

Remedy: Put a capacitor of 33 microF between pin 9 and ground. Part(s): (C ...)

Model: AE1C

Subject: No picture

Symptom: No picture

Cause: Q330 is defect.

Remedy: Change this transistor Part(s): 8-729-216-22 (Q 330)